Instant Connect
Scan to connect via WhatsApp or WeChat
30+ organophilic clay grades for paints, oil drilling, lubricating grease, printing inks, cosmetics, and water treatment. Select by application below, or use the Product Finder for guided grade selection.
| Grade | Description | LOI | Color | Activation |
|---|---|---|---|---|
| CP-34 | General purpose, aromatic systems, with activator | 28–30% | Light yellow | Polar activator required |
| SG-58 | Direct-add grade; paints/coatings and oilfield application candidate | <32% | Off-white | No polar activator or pre-gel per supplied guidance |
| CP-40 | Low- to intermediate-polarity solvent systems; coatings, grease, adhesives and sealants | <32.2% | White | Polar activator recommended |
| CP-APA | Self-activating, ketone/ester/aromatic systems | 32–35% | Off-white | Self-activating |
| CP-180B | Fine particle, clear gel, fumed silica replacement | 29–32% | Light yellow | Polar activator required |
| CP-388 | High purity, widest polarity range, PE/PP composites | 31–34% | Light yellow | Optional activator |
| CP-VZ | Self-activating, ≤20μm, polyester/alkyd/epoxy/PU | 31–33% | Light yellow | Self-activating |
| CP-27A | High polarity, epoxy systems, marine & anti-corrosion | ≤38% | Light yellow | Optional activator |
| CP-EZ | Ultra-fine ≤10μm, high purity, self-activating | 35–37% | Light yellow | Self-activating |
| CP-10 | White, self-activating, ≤40μm, light-tinted paints | 30–34% | White | Self-activating |
| CP-26 | Economical, self-activating, ≤40μm | 26–29% | White | Self-activating |
| CP-RL | Plasticity modifier, nonpolar systems, ≤20μm | ≤33% | Light yellow | Self-activating |
| CP-120 | ≤10μm, medium-high polarity, no-solvent inks | 34–37% | Light yellow | Multiple activators |
| CP-908 | White, low-medium polarity, multi-application | 29–32% | White | Polar activator required |
| CP-300A | White, low-medium polarity, refractory applications | 29–32% | White | Polar activator required |
| CP-180 | White, diesel & low-polarity systems | 29–32% | White | Polar activator required |
| CP-24 | Economical, transparent coatings, low base viscosity thixotropy | <29% | White | Polar activator required |
| CP-24B | Economical, wide intermediate-low polarity range | <29% | White | Polar activator required |
| CP-21A | High purity, ≤10μm, cost-effective | 26±1.5% | Light yellow | Self-activating |
| Grade | Description | Key Spec | Activation |
|---|---|---|---|
| CP-982 | Standard OBM viscosifier, diesel & mineral oil | ≥95% <76μm | No activator (drilling use) |
| CP-992 | Wet process, rapid yield, synthetic & low-BTEX base fluids | LOI 35–39% | No activator (drilling use) |
| CP-31 | Self-activating, low shear, cold climate | ≥95% <76μm | Self-activating |
| CP-2 | Amine-treated, diesel OBM viscosifier | ≥95% <76μm | No activator (drilling use) |
| CP-34 | Dual-use: coatings + drilling | LOI 28–30% | Polar activator (coatings) |
| SG-58 | Oilfield application candidate; qualify in actual mud | Request grade-specific drilling TDS | Direct-add guidance; confirm drilling procedure |
| CP-OC | API-grade sodium bentonite for water-based drilling mud | API 13A | Hydrates in water |
| Grade | Description | Typical Loading |
|---|---|---|
| CP-40 | Low- to intermediate-polarity solvent and oil applications | Formulation-specific |
| CP-250A | Synthetic & vegetable oil greases, drop point >260°C | 7–10 wt% |
| CP-720A | Vegetable oil & bio-based greases, biodegradable EAL | 7–10 wt% |
| CP-2143 | Naphthenic & paraffin mineral oil, rust protection | 7–10 wt% |
| CP-2148 | Centrifugal purified, zero impurities, precision bearings | 7–10 wt% |
| CP-21A | High purity ≤10μm, mineral oil base primarily | 7–10 wt% |
| CP-120 | ≤10μm, ester/synthetic base oils, multiple activators | 7–10 wt% |
| Grade | Description | Viscosity Reference |
|---|---|---|
| CP-EW | Standard water-dispersible grade, 0.2–3.0% | Gel at ≥2% in water |
| CP-EWS | Improved grade, ceramics, higher thixotropy | ≥3,000 mPa·s at 3% |
| CP-WBS | Highest viscosity, putty & high-build coatings | 10,000–13,000 mPa·s at 10% |
| THICKENT W | Dual aqueous/solvent system, HEC/HPMC replacement | 1,500–2,500 mPa·s at 2% |
| THICKENT | Cellulose-clay composite, HPMC replacement for mortar | Y5: 2,600–4,000 / Y7: 4,500–6,500 mPa·s |
| Grade | Description | Typical reference |
|---|---|---|
| CP-200 | Granular organoclay adsorption media for groundwater, leachate and organic-contaminant remediation | 600–1850 μm; oil adsorption ≥0.5 g/g |
| Application | Primary Grades | Notes |
|---|---|---|
| Solvent-based industrial paint (aromatic) | CP-34, CP-40, CP-APA, SG-58 | SG-58 supplied paint dosage: 0.2–0.7%; compare current TDS and formulation fit |
| Transparent coatings / clear lacquers | CP-EZ, CP-180B, CP-24 | ≤10μm dispersion for zero haze |
| Marine / anti-corrosion coatings (epoxy) | CP-27A, CP-34 | High-polarity epoxy system compatibility |
| High-solid / low-VOC coatings | CP-APA, CP-180B | Self-activating — no ethanol activator VOC |
| Oil-based drilling fluid (standard) | CP-982, CP-2, SG-58 | SG-58 requires drilling-specific TDS and mud-system qualification |
| OBM — synthetic / low-aromatic base | CP-992, CP-31 | Rapid yield, less shear required |
| Lubricating grease — synthetic base | CP-250A, CP-720A | Drop point >260°C |
| Lubricating grease — mineral oil base | CP-2143, CP-21A | Naphthenic / paraffinic mineral oil |
| Precision bearing grease | CP-2148 | Zero quartz/feldspar, centrifugal purification |
| Printing ink (planographic / gravure) | CP-250, CP-EZ | No activator needed; ≤10μm no plate abrasion |
| Waterborne coatings | CP-EW, CP-EWS | Direct powder addition in water |
| High-viscosity waterborne putty | CP-WBS | 10,000–13,000 mPa·s at 10% |
| Construction mortar / tile adhesive | THICKENT Y5/Y7, THICKENT W | HPMC / HEC replacement |
| Water-based drilling (freshwater) | CP-OC | API 13A sodium bentonite |
| General water-based thickening (paints, inks, industrial fluids) | CP-OC | Unmodified sodium bentonite; economical general-purpose thickener |
| Groundwater, leachate and oil-contaminated water treatment | CP-200 | Granular organoclay adsorption media; qualify by project testing |
Use our Product Finder to narrow down by solvent system, application, and activation preference — or contact our technical team with your formulation parameters.
We reply within 24 hours on business days.
Thank you! Your inquiry has been received.
We'll get back to you within 24 hours.
WeChat ID
0086-13185071071